DPF differential pressure sensor output voltage (Solution)

Author

Message

dieselschrauber
Administrator

Joined: 04/12/2002
Posts: 18009
Karma: +786 / -0

Location: St.Gallen
2018 Volkswagen T6 Consumption

03-02-2016, 12:15 Subject: DPF differential pressure sensor output voltage	Quote

Error code P2454/P2455 indicates that the DPF differential pressure sensor output voltage is too low or too high. This error is triggered when the output voltage of the differential pressure sensor falls outside the expected measurement range. The following needs to be checked: - Wiring harness/electrical connectors for the differential pressure sensor. - Supply voltage for the differential pressure sensor (typically +5V). - Differential pressure sensor itself. Dipl.-Ing. (FH) Rainer Kaufmann - Original VCDS mit KPower, KDataScope und Dieselschrauber Support Translated on 10-07-2026, 7:57.

Ratings - DPF differential pressure sensor output voltage

Average rating: 0.00 - worst rating: 0 - best rating: 0 - number of ratings: 0 - View ratings

You are not authorized to rate this topic. Danke sagen

Topic		Forum
Similar articles and topics
	Differential pressure sensor G450 to be calibrated/adjust...	Faults & Documentation (Audi, VW, Seat/Cupra, Skoda)
	Der Differenzdrucksensor	Diesel Engine Technology
	T5 Differenzdrucksensor	On-Board Diagnostics (OBD)
	Differential Pressure Sensor	Diesel Engine Technology
	When is a differential pressure sensor dead?	Diesel Engine Technology

You cannot post new topics in this forum.