Which Steuergeräte encode for AHK, Audi A4 B7??

Hello,
I am the owner of an Audi A4 Avant B7 2.0 TDI, manufactured in 2008, and I had a detachable tow hitch from Westfalia with a Jaeger electrical kit installed last week.
Can anyone help me with coding the ECU?
I have already re-coded the onboard electrical system control unit: now the trailer hitch is obviously recognized, because the fog light on the car is no longer off when a trailer is attached. Before the coding, the fog light on the trailer AND the car was off. But unfortunately, my rear parking brake is still not being deactivated . It seems like another control unit needs to be reprogrammed!?
I would be grateful if someone could offer me some advice!
Best regards,
universe

I don't know - I would call the Rameder hotline if you purchased it there.

univerSe wrote:

It seems like another control unit needs to be re-coded!

Okay, one more needs to be re-encoded. Logically, for parking assistance.

Hm, that's what I was thinking. Do you know exactly how I need to re-encode it, i.e., the exact code?

I don't know. But shows you on the VAG-COM, normally.

I'm not sure if the PDC knows or needs to know this.

But the CAN Gateway should know, because then everyone else can ask, who is installed in the neighborhood

Otherwise: Please submit the complete error scan here. Then further assistance can be provided.

m;

dieselmartin wrote:

I'm not sure whether the PDC can/should know this.

Even with my 7-year-old Golf, I had the choice between: "Tow hitch installed" or "Tow hitch not installed" when coding the PDC (Parking Distance Control) system. For a 2007 A6 (4F), it also needs to be re-coded after installing a tow hitch. That's probably how it will be with the A4 size as well.

Yep, you're right!
Do you http://wiki.ross-tech.com/index.php/Audi_A4_(8E)_Parking_Aid_(4/8-Channel_-_8EC/8ED)