TT5 Programming for Audi A6

Hello!

I am now the proud owner of a VAG-COM interface and, of course, I have already tried quite a few things with it.
As one of the first things I did with my TipTronic, I disabled the DSP. So far, that's worked well (and it feels better). Actually, I also wanted to activate the "new standard" setting, but it absolutely refuses to do so.
Could it be that there are control units that don't yet recognize this coding and therefore reject it, or am I missing something? Is it possible to "convince" it with a login?

currently:

Code:

Adresse 02: Getriebe    Protokoll: KW1281    Teilenummer: 4B0 927 156 CH    Bauteil: AG5 01L 4.2l5V  RdW 1313    Codierung: 00011    Betriebsnr.: WSC 02325

...and I actually wanted to...

Code:

Adresse 02: Getriebe    Protokoll: KW1281    Teilenummer: 4B0 927 156 CH    Bauteil: AG5 01L 4.2l5V  RdW 1313    Codierung: 00111    Betriebsnr.: WSC 02325

Okay, so it's two '0's followed by three '1's.


T-H-A-N-K-Y-O-U.

I can only speak from my own experience, and in that context, he only accepts the "new standard" when used in combination with DSP.
When DSP is inactive, it automatically shifts to first gear when the vehicle comes to a stop.