VW Polo 9N: Longlife oil not possible

Hello,

For a Polo 9N manufactured in 2008, it is not possible to set the longlife service interval. In channel 45 of the instrument cluster, only the value "2" is available, not "4".

Does anyone have any ideas?

Quote:

Address 01: Engine Control Unit Label file: DRV\045-906-013-BMS.clb Part number SW: 045 906 013 Hardware number: 045 906 013 Part: R3 1.4L EDC G000SG 9973 Revision: --H01--- Serial Number: VWZ5Z0G5251250 Encoding: 0003071 ... Address 17: Control panel module Label file: DRV\6Q0-920-xxx-17.lbl Part number: 6Q0 920 825 F. Component: AGD V04 COMBINATION INSTRUMENT. Encoding: 01132 Operating Number: WSC 00000

Best regards, Rainer.

With access permission?
hg
Herbert.


Edit: /viewtopic.php?t=10656

Hello everyone!

Here's another idea:
Populate the WSC with digits excluding zero?

Best regards from Munich!

@ Herbert

What does "with access permission" mean?


According to the tooltip, should a "4" be entered for channel 45? However, it returns an error.

For some adaptation channels, you can only make changes using an access code.
But first, check the link provided - according to the description there, for the Polo 9N, "2" indicates "longlife" oil.
Sure, here's the translation:

"Best regards."
Herbert.

For the Golf 5 manufactured in August 2008, there was a known issue/bug.
First, the AIs were completely replaced, then there was an event and an update.

As far as I know, he accepted the LL (likely referring to a warranty or service plan), but even after 15,000 km, it still started making noises indicating an oil problem.

I therefore had an X-KI installed in my Golf (where it was replaced).

Code:

Adresse 17: Schalttafeleinsatz        Labeldatei: RKS\1K0-920-xxx-17.lbl    Teilenummer SW: 1K0 920 864 BX    HW: 1K0 920 864 BX    Bauteil: KOMBIINSTRUMENT VDD 1212     Revision: V0002000    Seriennummer: VWXBZ0G0722    Codierung: 0007103    Betriebsnr.: WSC 45489 142 62017

m;

It appears that the tooltip for the Polo 9N3 in VCDS is incorrect.

Channel 45 can only be tuned to channel 1 or 2.