VCDS Vehicle Diagnostics - Guides for working with VCDS
Audi:Volkswagen:General instructions:
Systematic troubleshooting for lack of performance with VCDS
Service reminder, maintenance interval display, service reset
Adjusting XENON headlights with VCDS
Normal values of control signalsTesting and Calibration of TDI Common-Rail Injectors
Testing & Adjustment of the TDI 1.9l Distributor Injection Pump VP37
Basic Adjustment of the VP44 Injection Pump
Throttle Basic Setting with VCDS
Adaptation Channels of the Engine Control Unit, especially TDIs with Distributor Injection Pumps
Adjustment of the Glow Plug Time on VAG-TDIs with VCDS
Login Codes (for GRA / Cruise Control retrofitting, idle speed, etc.)
Retrofitting Cruise Control on newer vehicles from approximately 2006, general procedure
Activating the Electric Fuel Pump on PD and CR-TDIs (bleeding the injection system)
Basic settings for Teves Mark 60 (MK60)
Basic settings for Teves Mark 20 IE (MK20)
Basic settings for Bosch ABS/ESP 5.3
Zeroing of steering angle sensor G85 for Bosch ABS version 5.3
Electric parking brake (EPB) diagnosis and maintenance, pad replacement
Electronic lowering with VCDS / Zeroing for active suspension
Forced regeneration of the particulate filter with VCDS
Resetting the ash mass after replacing the particulate filter (DPF) with VCDS
Normal values for ash mass and mileage of the particulate filter (DPF)
Differential pressure sensor for DPF. Re-learning with VCDS / Deleting learned values
DPF differential pressure normal values for TDIs
TDI injector learning (injector calibration)
TDI injector normal values
Diagnosis of retrofitted Eberspächer auxiliary heaters
Diagnosis of retrofitted Webasto auxiliary heaters
Unlocking auxiliary heater for Audi, Seat, Volkswagen
DSG basic setting, adjustment after new mechatronics/TCM
Coding/indexing of airbag control units
Airbag coding
Retrofitting trailer hitch, basic procedure
Coding daytime running lights, basic.Procedure
Further links for vehicle diagnostics:
The
location of the diagnostic socket in various VAG vehicles is shown in the images
A and
B.
Diagnostic Adapter for Ross-Tech VCDS®For all vehicles of the Volkswagen Group from approximately the year of manufacture 1993, more or less important information from the engine management system can be retrieved via the diagnostic interface. This can be achieved using an adapter for the PC's serial port, then you only need a low-cost laptop/notebook/netbook and the corresponding software.
A Pentium processor running at 500MHz with 64MB of RAM and a USB interface is already sufficient.
This may also be of interest to smaller workshops and hobbyists. Without the possibility of accessing the on-board diagnostics, troubleshooting modern, complex engine electronics systems can easily become a guessing game, although reading the error memory could quickly provide clarity.
VCDS offers a very extensive range of functions that even surpasses that of the original VAG 155x or VAS 505x, and it also enables data recording for later analysis.
At the
Dieselschrauber VCDS - Online Shop, you will find VCDS diagnostic tools for Audi, Bentley, Cupra, Seat, Skoda, Volkswagen, and Bentley, which meet both hobbyist and professional requirements. You will also find the latest VCDS software for download there, as well as further help on topics related to OBD and vehicle diagnostics.
