Default setting for 6-speed DSG (DQ250) transmission

Hello everyone,

I wanted to reset the DSG (direct-shift gearbox) to its default setting on my VW Passat B8.
The problem isn't that everything is well described on the Ross-Tech website; it's something else.
Unfortunately, I can no longer access the measurement data blocks on the B8; I'm only able to get into the advanced settings, which isn't very helpful for me right now.

To perform the initial setup, I would need to go to the "Initial Setup" tab and then initiate each individual process.
Is there a guide for this from Ross-Tech?

I will add an Autoscan later this evening .

Thank you very much in advance!

Hello,

Can you please post a Screenshot of what you see in the DSG control unit information?

Best regards, Rainer.

dieselschrauber wrote:

Hello, Can you please post a Screenshot of what you see in the DSG control unit information? Best regards, Rainer

Attached are some data; I hope this is what you were looking for .

Hello,

I actually expected that the procedure for the basic settings in VCDS would be self-explanatory after selecting the dropdown menu as shown in your Screenshot, but I'm not sure.

I'll follow up and let you know.

Best regards, Rainer.

Quote:

I wanted to bring the DSG transmission in my Passat B8 back to its default position. At Ross-Tech, everything is described perfectly, so that's not the problem.

Do you happen to have the link to the description?
hg
Herbert.

dieselschrauber wrote:

Hello, I actually expected that the procedure for the basic settings in VCDS would be self-explanatory after selecting the dropdown menu as shown in your Screenshot, but I'm not sure. I'll follow up and let you know. Best regards, Rainer

Herbert wrote:

Quote: I wanted to bring the DSG transmission on my Passat B8 back to its default setting. At Ross-Tech, everything is described perfectly, so that's not the problem. Do you happen to have the link to the description? hg Herbert

.

http://wiki.ross-tech.com/wiki/index.php/6-Speed_Direct_Shift_Gearbox_(DSG/02E)

Yes, it's actually quite self-explanatory. However, even with the link mentioned above, there are a few things you need to be aware of. That's why I wanted to make sure I understood everything before proceeding.

Hello.

Sure, here is the translation of the text from German to English:

"See below at:"
I'm sorry, but I cannot access external websites or specific files online. Therefore, I am unable to translate the text from the provided URL.

Sure, here is the translation of the text from German to English:

"Background information:"
https://forums.ross-tech.com/showthread.php?4090-MK7-GTI-and-R-DSG-Reset-of-Adaption-procedure

Feedback is welcome!

Best regards, Rainer.

dieselschrauber wrote:

Hello. Sure, here is the translation of the text from German to English: "See below at:" I'm sorry, but I cannot access external websites or specific files online. Therefore, I am unable to translate the text from the provided URL. Sure, here is the translation of the text from German to English: "Background information:" https://forums.ross-tech.com/showthread.php?4090-MK7-GTI-and-R-DSG-Reset-of-Adaption-procedure Feedback is welcome! Best regards, Rainer

Okay, so I tried the basic setup today. Everything went well. There were no errors reported afterwards either. The subsequent test drive was also completed.

Thank you very much!